74CBTLV3245APWRE4 Overview
As a means of saving space, digital switch is provided in the 20-TSSOP (0.173, 4.40mm Width).Tape & Reel (TR) is the packaging method.As far as mounting is concerned, digital switch ic uses Surface Mount.The analog IC used in the multiplexers can be referred to as Bus Switch.If the operating temperature is maintained at -40°C~85°C, turn signal switch will not be susceptible to external factors.When operated with a 2.3V~3.6V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.Multiplexers in the 74CBTLV series are suitable for a wide range of applications.As parts of its basic configuration, 20 terminations are desgined.You can also find related parts by using its logic switch base part number of 74CBTLV3245.The multiplexer's system is supplied with a voltage of 2.5V.This turn signal switch has a total of 20 component pins.As a result, conductors end at GULL WING.There is a type of supply of Single.A total of 20 pins are configured on this board.The mounting point is Surface Mount.There is a family of CBTLV/3B members.Signal multiplexer contains 8 bits.It is recommended that the minimum supply voltage (Vsup) be kept at 2.3V so that unnecessary failures can be prevented.Vsup (maximum supply voltage) should be kept as 3.6V to prevent unnecessary failures.In electronic terms, the digital switch ic is classified as part number Bus Driver/Transceivers.It consumes 20μA current of multiplexer ic since it is not affected by external factors.The performance of the multiplexers can be reliably maintained at a voltage of 3.3V.TR is used to package the switches.The resistance is 2.With a resistance of 7Ohm, it operates.For higher switches' flexibility, the output current is set to 64mA.
74CBTLV3245APWRE4 Features
Supplied in the 20-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 3.3V
74CBTLV3245APWRE4 Applications
There are a lot of Texas Instruments 74CBTLV3245APWRE4 Signal Switches / Multiplexers / Decoders applications.
- Steel plants
- Paper plants
- Enabling different functions units in microprocessor instruction decoding
- HDMI applications
- Enabling different rows of memory depending on address in memory chips
- LVDS
- Used to connect a single source to multiple destinations
- Data distribution
- Data-routing applications
- Data demultiplexing
