74FCT162244CTPVCG4 Overview

The SSOP package is neat. The ethernet transceiver has 48 terminations with different functions. There is a voltage requirement of 5V. Electronic parts from the FCT family are used in this part. A total of 48 pins are included with the electric component. This logical driver can be used in Surface Mount different applications. The pin count is 48. 2 ports are included in this logic device. Each element uses 4 bits. As long as the electronic component is in the quiescent state, it uses 500μA. Use a 5V power supply if possible. Generally, it comes in a TUBE package. When running the electronic part in a circuit, it is recommended that users apply 5V supply voltage. Operating temperatures as low as -40°C are possible. No more than 85°C should be the ambient temperature when automotive buffer is operating. In its low-level output mode, it outputs 24mA. When operating in high-level output mode, the electronic component can conduct up to -24mA. At the very least, the voltage used to operate this electrical component should be at least 4.5V. There is a 5.5V maximum supply voltage rating on it. In total, 3 signal lines can be output by the logical driver. BUS DRIVER logic ICs are called that. As long as 16 outputs are produced, then it is sufficient. Under ENABLE LOW control, the logical driver starts up.

74FCT162244CTPVCG4 Features

High Level Output: 24mA
Low Level Output: -24mA
BUS DRIVER Logic IC

74FCT162244CTPVCG4 Applications

There are a lot of Texas Instruments
74FCT162244CTPVCG4 Buffers & Transceivers applications.

• Wireless network systems
• Satellite communications networks
• Ethernet circuitry
• Wired telephone
• Cordless telephone
• Desktop PC
• Notebook
• Pocket PC
• Desktop radio
• Clock radio