74FCT16373ATPACTG4 Overview

It is embedded in the TSSOP package. It is packaged in the way of Tape and Reel. This electronic part is designed with 8 Bits. There are 48 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. It operates with a supply voltage of 5V. It is equipped with 48 pin count. This electronic device belongs to the family of FCT. It is designed with 48 pins. This electronic part is mounted in the way of Surface Mount. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. This part is included in FF/Latches. It operates from 5V power supplies. There are 16 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. The supply voltage should be maintained at 5V for high efficiency. It consumes 500μA of quiescent current without being affected by external factors. It consists of 2 elements. The low level output current is set to 64mA. The high level output current is set to -32mA. The operating temperature should be lower than 85°C. The operating temperature should be higher than -40°C. It supports the maximal supply voltage of 5.5V. It operates with the minimal supply voltage of 4.5V. The logic IC it adopts is BUS DRIVER. The output current of 64mA makes it feature maximum design flexibility.

74FCT16373ATPACTG4 Features

TSSOP package
8 Bits
48 pin count
48 pins
5V power supplies
2 elements

74FCT16373ATPACTG4 Applications

There are a lot of Texas Instruments
74FCT16373ATPACTG4 Latches applications.

• Lamp and Display (LED)
• Hammer Device Information
• Relay
• Network Switches
• TV Set-top Boxes
• Motor Drives
• PCs and Notebooks
• Hammer
• Parallel data storage
• Digital bus buffer