74FCT16373ATPVCG4 Overview

In the SSOP package, it can be found as an embedded module. Rail/Tube is the way in which it is packaged. The design of this electronic part contains 8 bits. This device has been designed with 48 terminations available. The device works with a voltage of 5V for its supply voltage. There are 48 pins attached to it. It is a member of the FCT family of electronic devices. This board has 48 pins on it, which is what it is designed for. Electronic parts are mounted using the Surface Mount method. This device has 2 ports on board, which are all available at the same time. This part can be found within the FF/Latches subcategory. There is 5V power supply for it. It contains 16 input lines where electronic circuits are present. If you want to achieve high efficiency, make sure the supply voltage is at 5V. It consumes 500μA current from its quiescent state without being affected by external factors at all. A total of 2 elements are contained in it. 32mA is set as the low level output current. -32mA is set as the high level output current. It is recommended to work at a temperature lower than 85°C. In order for the system to operate properly, the operating temperature should be higher than -40°C. It is capable of providing a maximum supply voltage of 5.5V. In order for the machine to operate, the supply voltage must be 4.5V. A logic IC that is used in this application is BUS DRIVER. The output current of this device is 64mA, which makes it a very flexible design element.

74FCT16373ATPVCG4 Features

SSOP package
8 Bits
48 pin count
48 pins
5V power supplies
2 elements

74FCT16373ATPVCG4 Applications

There are a lot of Texas Instruments
74FCT16373ATPVCG4 Latches applications.

• Digital bus buffer
• Flip-flops
• Parallel data synchronization
• Parallel data storage
• Shift register
• Pattern generators
• Automotive Infotainment
• Automotive Cluster
• Automotive ADAS
• Automotive Body Electronics