74FCT16823CTPVCTG4 Overview
As a result, it is packaged as 56-BSSOP (0.295, 7.50mm Width). D flip flop is embedded in the Tape & Reel (TR) package. As configured, the output uses Tri-State, Non-Inverted. It is configured with a trigger that uses a value of Positive Edge. Surface Mountis occupied by this electronic component. A voltage of 4.5V~5.5Vis required for its operation. -40°C~85°C TAis the operating temperature. This electronic flip flop is of type D-Type. In terms of FPGAs, it belongs to the 74FCT series. D latch consists of 2 elements. As a result, it consumes 500μA quiescent current. A total of 56terminations have been recorded. Members of the 74FCT16823family make up this object. The D flip flop is powered by a voltage of 5V . The input capacitance of this JK flip flopis 4.5pF farads. It belongs to the family of electronic devices known as FCT. Surface Mount mounts this electronic component. As you can see from the design, it has pins with 56. Its clock edge trigger type is Positive Edge. It is part of the FF/Latchesbase part number family. The flip flop is designed with 18bits. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TAPE AND REEL. An electrical current of 5V volts is applied to it. The D flip flop is embedded with 2ports. If high efficiency is to be achieved, the supply voltage should be maintained at 5V. It offers maximum design flexibility with its output current of 64mA. In order for the chip to function, it has 9output lines. It consumes a total of 5μA quiescent current at any given time.
74FCT16823CTPVCTG4 Features
Tape & Reel (TR) package
74FCT series
56 pins
18 Bits
5V power supplies
74FCT16823CTPVCTG4 Applications
There are a lot of Texas Instruments 74FCT16823CTPVCTG4 Flip Flops applications.
- Consumer
- Divide a clock signal by 2 or 4
- Modulo – n – counter
- Automotive
- Data transfer
- Individual Asynchronous Resets
- Single Up Count-Control Line
- Parallel data storage
- Control circuits
- Load Control
