74LVC1G175DBVRE4 Overview
The flip flop is packaged in a case of SOT-23-6. The package Tape & Reel (TR)contains it. As configured, the output uses Non-Inverted. It is configured with the trigger Positive Edge. This electronic part is mounted in the way of Surface Mount. With a supply voltage of 1.65V~5.5V volts, it operates. Currently, the operating temperature is -40°C~125°C TA. D-Typedescribes this flip flop. JK flip flop is a part of the 74LVCseries of FPGAs. Its output frequency should not exceed 175MHz Hz. A total of 6terminations have been recorded. If you search by 74LVC1G175, you will find similar parts. Power is provided by a 1.8V supply. Its input capacitance is 3pF farads. A device of this type belongs to the family of LVC/LCX/Z. Surface Mount mounts this electronic component. It is designed with 6 pins. This device's clock edge trigger type is Positive Edge. The part is included in FF/Latches. It is designed with a number of bits of 1. In this case, the maximum supply voltage (Vsup) reaches 5.5V. Due to its superior flexibility, it uses 1 circuits. As a result of its reliability, this D flip flop is ideally suited for TR. In order for the device to operate, it requires 3.3V power supplies. Featuring the maximum design flexibility, it has an output current of 32mA . In terms of quiescent current, it consumes 10μA .
74LVC1G175DBVRE4 Features
Tape & Reel (TR) package
74LVC series
6 pins
1 Bits
3.3V power supplies
74LVC1G175DBVRE4 Applications
There are a lot of Texas Instruments 74LVC1G175DBVRE4 Flip Flops applications.
- Circuit Design
- Parallel data storage
- Count Modes
- Convert a momentary switch to a toggle switch
- Divide a clock signal by 2 or 4
- Functionally equivalent to the MC10/100EL29
- Power down protection
- Computers
- Data transfer
- ESD performance
