74LVC1G175DBVRG4 Overview
SOT-23-6is the packaging method. Package Tape & Reel (TR)embeds it. Non-Invertedis the output configured for it. The trigger it is configured with uses Positive Edge. Surface Mountmounts this electrical part. A supply voltage of 1.65V~5.5V is required for operation. Temperature is set to -40°C~125°C TA. A flip flop of this type is classified as a D-Type. In terms of FPGAs, it belongs to the 74LVC series. It should not exceed 175MHzin terms of its output frequency. In 6terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. D latch belongs to the 74LVC1G175 family. The power source is powered by 1.8V. The input capacitance of this JK flip flopis 3pF farads. Electronic devices of this type belong to the LVC/LCX/Zfamily. This electronic part is mounted in the way of Surface Mount. There are 6pins on it. In this device, the clock edge trigger type is Positive Edge. This device is part of the FF/Latchesbase part number family. This flip flop is designed with 1 Bits. Vsup reaches its maximum value at 5.5V. Using 1 circuits, it is highly flexible. Due to its reliability, this T flip flop is well suited for TR. In order for the device to operate, it requires 3.3V power supplies. This T flip flop features a maximum design flexibility due to its output current of 32mA. It consumes a total of 10μA quiescent current at any given time.
74LVC1G175DBVRG4 Features
Tape & Reel (TR) package
74LVC series
6 pins
1 Bits
3.3V power supplies
74LVC1G175DBVRG4 Applications
There are a lot of Texas Instruments 74LVC1G175DBVRG4 Flip Flops applications.
- CMOS Process
- Cold spare funcion
- Consumer
- Shift Registers
- ESD performance
- Modulo – n – counter
- Frequency Divider circuits
- Reduced system switching noise
- Buffered Clock
- Differential Individual
