74LVC1G3157DCKRE4 Overview

The electronic part can be shipped overseas conveniently because it is packaged in 6-TSSOP, SC-88, SOT-363. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. There is an analog multiplexer mounted in position Surface Mount. Multiplexers and demultiplexers have a ratio of 2:1. Operating temperature around -40°C~85°C TA extended. A total of 6 terminations have been recorded. A 1 channel electronic part produces high-quality output. When a voltage supply of 2.3V is used, the electronic component should be turned on and run. This electronic part can be found in the 6 series. Multiplexers built on a SPDT switching circuit are built. This multiplexer is composed of 1 circuits. If you are looking for variants of the digital switch, trying search with 74LVC1G3157. In this multiplexer, the internal resistance is 15Ohm. Datasheets for functions of 6 pins are available. Multiplexers or Switches is a typical switch device. Users should never supply a voltage higher than 5.5V to a switch device. The analog switch ic is of the Single supply type and is cost-effective. 1.65V is the lowest voltage the electrical component should receive. This multiplexer would work with 1μA current. Draining from a single voltage supply, this analog switch requires a voltage of 1.65V~5.5V. When the digital multiplexer is charged above 10μA, damage can occur. The data can be transferred over a wide range of bandwidths, called 300MHz bandwidths. The analogue multiplexer has 2 outputs.

74LVC1G3157DCKRE4 Features

1 Channels
Switch Circuit: SPDT
1μA Supply Current
Bandwidth: 300MHz

74LVC1G3157DCKRE4 Applications

There are a lot of Texas Instruments 74LVC1G3157DCKRE4 Analog Switches & Multiplexers ICs applications.

• Access Concentrators
• PBXs
• Power routing
• Relay replacements
• Isolation
• Digital access cross connects
• Ultrasound
• Imaging
• Automatic test equipment
• Switching Systems