Shipping overseas is convenient due to the electrical component's packing in 6-TSSOP, SC-88, SOT-363. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). A switch device like this is mounted in Surface Mount. Multiplexers and demultiplexers have the same number of circuits 2:1. An extended operating temperature of -40°C~85°C TA degrees Celsius. In total, there have been 6 terminations. By its 1 channels, the electronic component provides high-quality output. If the voltage supply is 2.3V volts, the electrical component should be turned on and run. A total of 6 pins are injected into the electrical part body. Multiplexers built on a SPDT switching circuit are built. Circuits number 1 make up this analogue multiplexer. Try searching for 74LVC1G3157 variants of the analog switch ic. The internal resistance of this digital multiplexer is 15Ohm. For functions related to 6 pins, please refer to the datasheets. This switch device is a typical Multiplexers or Switches. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. A analog switch ic that has a cost-effective Single supply type. It is recommended that the electrical component receives a voltage of 1.65V. It would be sufficient to run this analogue multiplexer with 1μA current. Analogue multiplexers require a 1.65V~5.5V voltage to drain from a single voltage supply. If put voltage greater than 10μA on the device, damage may be caused to the analogue multiplexer. It is possible to transfer data over a 300MHz-bandwidth. The analog switch ics has 2 outputs.
74LVC1G3157DCKRG4 Features
1 Channels Switch Circuit: SPDT 1μA Supply Current Bandwidth: 300MHz
74LVC1G3157DCKRG4 Applications
There are a lot of Texas Instruments 74LVC1G3157DCKRG4 Analog Switches & Multiplexers ICs applications.