ADC108S052CIMT Overview

The analogue to digital converter is designed with 10 Bits.The AD converter is embedded in the 16-TSSOP (0.173, 4.40mm Width) package.The ADC converter is packaged in the way of Tube.The ADC converter is equipped with 1 Functions .There are 16 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 3V.The A/D converter has 8 channels.The is equipped with 16 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, SUCCESSIVE APPROXIMATION converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~105°C.The number of samples of audio recorded every second is 500k Hz.The input type of this electronic AD converter is Single Ended.There are Supply reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that MUX-S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for TRACK time.The architecture that analogue to digital converter's core adopts is SAR.There are 16 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 2.7V~5.25V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 1.25 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to ADC108S052 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.Depending on the supply type, analogue to digital converters can be categorized by Analog, Digital.The supply/digital voltage of this electrical AD converter is 2.7V~5.25V.Surface Mount is a device that can be mounted on the digital converter.The ADC converter operates with the maximal supply voltage of 5.25V.It operates with the minimal supply voltage of 2.7V.This electrical digital converter operates from a supply voltage of 5V. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 12.1mW.The number of channels is growing strong/weak: 8.The conversion rate of this electrical AD converter is calculated as 500 ksps.There are 1 A/D converters, which are used to convert an analog signal like voltage to digital form so that it can be read and processed by a microcontroller. The ADC converter consists of 1 elements.

ADC108S052CIMT Features

1 Functions
16 basic kinds of terminations
16 pin count
Minimal supply voltage of 2.7V
1 elements

ADC108S052CIMT Applications

There are a lot of Texas Instruments ADC108S052CIMT ADC applications.

• Music reproduction technology
• Micro and pico cell systems, software radios
• 3-phase power control
• Instrumentation and test equipment
• Audio/Video devices
• CMOS Image sensors for mobile applications
• Data Acquisition Systems
• GSM, EDGE, PHS, UMTS, WCDMA, CDMA2000,
• 4-channel data acquisition
• Spectrum Analysis