ADC12D1800RFIUT/NOPB Overview

The analogue to digital converter is designed with 12 Bits.The AD converter is embedded in the 292-BGA Exposed Pad package.The ADC converter is packaged in the way of Tube.The ADC converter is equipped with 1 Functions .There are 292 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 1.9V.The A/D converter has 1 channels.The is equipped with 292 pin count.The peak reflow temperature (Cel) amounts to 250 to be essentially indestructible.There are ADC, PROPRIETARY METHOD converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~85°C.The number of samples of audio recorded every second is 3.6G Hz.The input type of this electronic AD converter is Differential.There are Internal reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that MUX-S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for TRACK time.The architecture that analogue to digital converter's core adopts is Folding Interpolating.There are 292 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 1.8V~2V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 1.5 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to ADC12D1800 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.Supply types can be categorized by Single.The supply/digital voltage of this electrical AD converter is 1.8V~2V.Surface Mount can be used to mount the AD converter on the wall.The ADC converter operates with the maximal supply voltage of 2V.It operates with the minimal supply voltage of 1.8V.The output formats of this electrical AD converter are PARALLEL, WORD , which are used to determine which data is exported and how data is displayed in many areas of OLIB.The maximal analog input voltage of this electrical AD converter is 0.86V.The ADC converter operates from 1.9V power supplies. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 4.95W.The conversion rate of this electrical AD converter is calculated as 3.6 Gsps.The minimal analog input voltage of this electrical AD converter is -0.8V.There are 2 converters, which will convert numbers to words and figures to words. Simultaneous Sampling can be ensured when operating.

ADC12D1800RFIUT/NOPB Features

1 Functions
292 basic kinds of terminations
292 pin count
Minimal supply voltage of 1.8V
1.9V power supplies

ADC12D1800RFIUT/NOPB Applications

There are a lot of Texas Instruments ADC12D1800RFIUT/NOPB ADC applications.

• Digital Multimeters, PLC's (Programming Logic Controllers)
• Scientific instruments.
• Uninterrupted Power Supplies
• GSM, EDGE, PHS, UMTS, WCDMA, CDMA2000,
• Spectrum Analysis
• Telecommunications
• TD-SCDMA, WiMAX
• Broadband data applications
• Micro and pico cell systems, software radios
• Wireless and wired broadband communications