ADS1110A4IDBVR Overview

The analogue to digital converter is designed with 16 Bits.The AD converter is embedded in the SOT-23-6 package.The ADC converter is packaged in the way of Tape & Reel (TR).The ADC converter is equipped with 1 Functions .There are 6 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 5V.The A/D converter has 1 channels.The is equipped with 6 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, DELTA-SIGMA converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~125°C.The number of samples of audio recorded every second is 240 Hz.The input type of this electronic AD converter is Differential, Single Ended.There are Internal reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that PGA-ADC.The architecture that analogue to digital converter's core adopts is Sigma-Delta.There are 6 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 2.7V~5.5V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 2 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to ADS1110 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.It is possible to categorize the supply type according to Single.The supply/digital voltage of this electrical AD converter is 2.7V~5.5V.The ADC converter operates with the maximal supply voltage of 5.5V.It operates with the minimal supply voltage of 2.7V.The output formats of this electrical AD converter are SERIAL , which are used to determine which data is exported and how data is displayed in many areas of OLIB.This electrical digital converter operates from a supply voltage of 5V.The maximal analog input voltage of this electrical AD converter is 5.7V.As an undesirable derivative of its primary action, The heat (energy loss or waste) that this electronic or electrical digital converter produces is 1.75mW. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 1.75mW.The number of channels is growing strong/weak: 1.The conversion rate of this electrical AD converter is calculated as 128 sps.The minimal analog input voltage of this electrical AD converter is -0.2V.PGA, Selectable Address can be ensured when operating.The digital converter operates with the minimal supply voltage (DC) of 2.7V.The ADC converter operates with the maximal supply voltage (DC) of 5.5V.

ADS1110A4IDBVR Features

1 Functions
6 basic kinds of terminations
6 pin count
Minimal supply voltage of 2.7V
Maximal supply voltage (DC) of 5.5V

ADS1110A4IDBVR Applications

There are a lot of Texas Instruments ADS1110A4IDBVR ADC applications.

• AC motor control
• Medical Imaging
• Smart antenna systems
• Music reproduction technology
• Digital beam-forming systems for ultrasound
• Communication Systems
• Spectrum Analysis
• High Speed Data Acquisition
• In-building wireless telephony
• Battery Operated Systems