ADS1118IRUGT Overview

The analogue to digital converter is designed with 16 Bits.The AD converter is embedded in the 10-XFQFN package.The ADC converter is packaged in the way of Cut Tape (CT).The ADC converter is equipped with 1 Functions .There are 10 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 3.3V.The A/D converter has 2 channels.The is equipped with 10 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, DELTA-SIGMA converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~125°C.The number of samples of audio recorded every second is 860 Hz.The input type of this electronic AD converter is Differential, Single Ended.There are Internal reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that MUX-PGA-ADC.The architecture that analogue to digital converter's core adopts is Sigma-Delta.There are 10 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 2V~5.5V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 2 B, which is on a display or in a camera sensor (specifically in a digital image).It belongs to ADS1118 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.There are several types of supply that can be categorized according to Single.The supply/digital voltage of this electrical AD converter is 2V~5.5V.The ADC converter operates with the maximal supply voltage of 5.5V.2, 4 inputs are employed.It operates with the minimal supply voltage of 2V.The output formats of this electrical AD converter are SERIAL , which are used to determine which data is exported and how data is displayed in many areas of OLIB.This electrical digital converter operates from a supply voltage of 3.3V.As an undesirable derivative of its primary action, The heat (energy loss or waste) that this electronic or electrical digital converter produces is 900μW. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 900μW.The number of channels is growing strong/weak: 2.The conversion rate of this electrical AD converter is calculated as 860 sps.PGA, Temperature Sensor can be ensured when operating.The ADC converter consists of 1 elements.The digital converter operates with the minimal supply voltage (DC) of 2V.The ADC converter operates with the maximal supply voltage (DC) of 5.5V.

ADS1118IRUGT Features

1 Functions
10 basic kinds of terminations
10 pin count
Minimal supply voltage of 2V
1 elements
Maximal supply voltage (DC) of 5.5V

ADS1118IRUGT Applications

There are a lot of Texas Instruments ADS1118IRUGT ADC applications.

• Wireless and wired broadband communications
• Transducer
• AC motor control
• Scientific instruments
• Micro and pico cell systems, software radios
• Smart antenna systems
• Medical Imaging
• Battery Operated Systems
• Digital Storage Oscilloscope
• GSM, EDGE, PHS, UMTS, WCDMA, CDMA2000,