ADS1220IPWR Overview

The analogue to digital converter is designed with 24 Bits.The AD converter is embedded in the 16-TSSOP (0.173, 4.40mm Width) package.The ADC converter is packaged in the way of Tape & Reel (TR).The ADC converter is equipped with 1 Functions .There are 16 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 3.3V.The A/D converter has 4 channels.The is equipped with 16 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, DELTA-SIGMA converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~125°C.The number of samples of audio recorded every second is 2k Hz.The input type of this electronic AD converter is Differential, Single Ended.There are External, Internal, Supply reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that MUX-PGA-ADC.The architecture that analogue to digital converter's core adopts is Sigma-Delta.There are 16 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 2.3V~5.5V ±2.5, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 3 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Other Converters.It belongs to ADS1220 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.The supply type of this electronic ADC converter is Analog, Digital, Dual.The supply/digital voltage of this electrical AD converter is 2.3V~5.5V.This electronic digital converter is mounted in the way of Surface Mount.The ADC converter operates with the maximal supply voltage of 5.5V.2, 4 inputs are employed.It operates with the minimal supply voltage of 2.3V.The output formats of this electrical AD converter are SERIAL , which are used to determine which data is exported and how data is displayed in many areas of OLIB.This electrical digital converter operates from a supply voltage of 3.3V.The maximal analog input voltage of this electrical AD converter is 2.5V.As an undesirable derivative of its primary action, The heat (energy loss or waste) that this electronic or electrical digital converter produces is 2.1mW. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 1.4mW.The minimal analog input voltage of this electrical AD converter is -2.5V.There are 1 converters, which will convert numbers to words and figures to words. PGA, Temperature Sensor can be ensured when operating.There are 4 analog transmissions, which are both based on how they adapt data to combine an input signal with a carrier signal. It operates with the maximal dual supply voltage of 2.3V.It operates with the minimal dual supply voltage of 2.75V.

ADS1220IPWR Features

1 Functions
16 basic kinds of terminations
16 pin count
Minimal supply voltage of 2.3V

ADS1220IPWR Applications

There are a lot of Texas Instruments
ADS1220IPWR ADC applications.

• Audio/Video devices
• Cell Phones
• Digital Multimeters, PLC's (Programming Logic Controllers)
• RADAR processing, digital oscilloscopes
• CMOS Image sensors for mobile applications
• Medical Instrumentation and medical imaging
• Music recording
• Digital signal processing
• Scientific instruments
• Rotary encoder