ADS1244IDGST Overview

The analogue to digital converter is designed with 24 Bits.The AD converter is embedded in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package.The ADC converter is packaged in the way of Cut Tape (CT).The ADC converter is equipped with 1 Functions .There are 10 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 5V.The A/D converter has 1 channels.The is equipped with 10 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~85°C.The number of samples of audio recorded every second is 15 Hz.The input type of this electronic AD converter is Differential, Single Ended.There are External reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that ADC.The architecture that analogue to digital converter's core adopts is Sigma-Delta.There are 10 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 2.5V~5.25V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 3 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to ADS1244 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.There are several types of supply, categorized by Analog, Digital.The supply/digital voltage of this electrical AD converter is 1.8V~3.6V.Surface Mount allows the ADC converter to be mounted.The ADC converter operates with the maximal supply voltage of 5.25V.It operates with the minimal supply voltage of 2.5V.The output formats of this electrical AD converter are SERIAL , which are used to determine which data is exported and how data is displayed in many areas of OLIB.This electrical digital converter operates from a supply voltage of 5V.The maximal analog input voltage of this electrical AD converter is 5V.As an undesirable derivative of its primary action, The heat (energy loss or waste) that this electronic or electrical digital converter produces is 270μW. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 270μW.The number of channels is growing strong/weak: 1.The conversion rate of this electrical AD converter is calculated as 15 sps.

ADS1244IDGST Features

1 Functions
10 basic kinds of terminations
10 pin count
Minimal supply voltage of 2.5V

ADS1244IDGST Applications

There are a lot of Texas Instruments ADS1244IDGST ADC applications.

• CMOS Image sensors for mobile applications
• Industrial Process Control
• Wireless local loop
• RADAR processing, digital oscilloscopes
• Instrumentation and test equipment
• Wireless and wired broadband communications
• Microcontrollers.
• Handheld Terminal Interface
• GSM, EDGE, PHS, UMTS, WCDMA, CDMA2000,
• Uninterrupted Power Supplies