ADS8380IBRHPT Overview

The analogue to digital converter is designed with 18 Bits.The AD converter is embedded in the 28-VQFN Exposed Pad package.The ADC converter is packaged in the way of Tape & Reel (TR).The ADC converter is equipped with 1 Functions .There are 28 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 3.3V.The A/D converter has 1 channels.The is equipped with 28 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, SUCCESSIVE APPROXIMATION converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~85°C.The number of samples of audio recorded every second is 600k Hz.The input type of this electronic AD converter is Pseudo-Differential, Single Ended.There are External, Internal reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for SAMPLE time.The architecture that analogue to digital converter's core adopts is SAR.There are 28 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 5V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 2.25 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to ADS8380 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.There are several types of supply, categorized by Analog, Digital, Single.The supply/digital voltage of this electrical AD converter is 2.7V~5.25V.The ADC converter operates with the maximal supply voltage of 5.25V.It operates with the minimal supply voltage of 4.75V.The output formats of this electrical AD converter are SERIAL , which are used to determine which data is exported and how data is displayed in many areas of OLIB.This electrical digital converter operates from a supply voltage of 5V.The maximal analog input voltage of this electrical AD converter is 4.2V.As an undesirable derivative of its primary action, The heat (energy loss or waste) that this electronic or electrical digital converter produces is 115mW. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 115mW.The number of channels is growing strong/weak: 1.The conversion rate of this electrical AD converter is calculated as 600 ksps.The digital converter operates with the minimal supply voltage (DC) of 2.7V.The ADC converter operates with the maximal supply voltage (DC) of 5.25V.It is a type of FPGA belonging to the microPOWER? series.

ADS8380IBRHPT Features

1 Functions
28 basic kinds of terminations
28 pin count
Minimal supply voltage of 4.75V
Maximal supply voltage (DC) of 5.25V
microPOWER? series

ADS8380IBRHPT Applications

There are a lot of Texas Instruments ADS8380IBRHPT ADC applications.

• High Speed Data Acquisition
• CMOS Image sensors for mobile applications
• AC motor control
• Wireless local loop
• Wireless and wired broadband communications
• GSM, EDGE, PHS, UMTS, WCDMA, CDMA2000,
• Microcontrollers.
• Digital Storage Oscilloscope
• High Speed Data Acquisition for PCs
• Communications