BQ24152YFFR Overview

There is a package for Tape & Reel (TR) in which it can be found.We've included it in the 20-UFBGA, DSBGA package so that it's easier to use.Mounting type for the device is Surface Mount.It is recommended that the temperature be set to -40°C~85°C TA in order to ensure reliable performance.In order to operate this device, an analog IC of POWER SUPPLY MANAGEMENT CIRCUIT must be used.The device requires Constant - Programmable current to charge.The related parts of the base part number BQ24152 can be found by following the order of the base part number.It contains a total of 20 terminations.As far as the battery pack is concerned, it is 4.44V Max.It is equipped with 20 pins.There are various programmable features, such as Current, Timer, Voltage.As long as it is charged at maximum current, it will be rated as 1.25A.It requires pins 20 to function.The number of available channels is 1.It should be able to run off a battery of 5V.In order for the device to operate properly, the supply voltage should not exceed 6V.When the output voltage is 4.44V, high efficiency is possible.In this case, the output current of the device is set to 1.2A.A supply voltage of 4V is suitable for it, because it can operate with a low supply voltage.Vsup (maximum supply voltage) is set in the command to 5mA.The part's power supply is set to a value of 5V.A minimum input voltage of 4V volts is required for this device.With 3MHz switching frequency, the part operates.

BQ24152YFFR Features

Battery pack voltage of 4.44V Max
1 channels
Switching frequency of 3MHz
20-UFBGA, DSBGA package

BQ24152YFFR Applications

There are a lot of Texas Instruments
BQ24152YFFR Battery Chargers ICs applications.

• Golf carts
• Forklift
• Pallet jacks
• Personnel carriers
• Maintenance shops
• Rental fleets
• Truck dealers
• Floor scrubber
• Material handling
• Man lift