BQ24261RGET Overview

There is a package for Tape & Reel (TR) in which it can be found.We've included it in the 24-VFQFN Exposed Pad package so that it's easier to use.Mounting type for the device is Surface Mount.It is recommended that the temperature be set to -40°C~85°C TA in order to ensure reliable performance.In order to operate this device, an analog IC of POWER SUPPLY MANAGEMENT CIRCUIT must be used.The device requires Constant - Programmable current to charge.The related parts of the base part number BQ24261 can be found by following the order of the base part number.It contains a total of 24 terminations.As far as the battery pack is concerned, it is 3.5V.There are various programmable features, such as Current.It requires pins 24 to function.The number of available channels is 1.It should be able to run off a battery of 5V.In order for the device to operate properly, the supply voltage should not exceed 13.2V.When the output voltage is 4.44V, high efficiency is possible.In this case, the output current of the device is set to 3A.A supply voltage of 4.2V is suitable for it, because it can operate with a low supply voltage.Amounting is in line with Surface Mount.Its supply carries 6.5mA current.As a maximum output supply voltage for this operation, the voltage must be set to 5.2V.In the course of operation, the maximum output current is reduced to 3A.

BQ24261RGET Features

Battery pack voltage of 3.5V
1 channels
24-VFQFN Exposed Pad package

BQ24261RGET Applications

There are a lot of Texas Instruments
BQ24261RGET Battery Chargers ICs applications.

• Golf carts
• Forklift
• Pallet jacks
• Personnel carriers
• Maintenance shops
• Rental fleets
• Truck dealers
• Floor scrubber
• Material handling
• Man lift