BQ24314DSGT Overview

A 8-WFDFN Exposed Pad package would be appropriate for this. IC POWER SUPPLY SUPPORT CIRCUIT is the system battery's analog IC. The available channels are 1. Currently, there are 8 pins on it. Tape & Reel (TR) cases are used for packaging. A minimum supply voltage of 3.3V volts is required for this electric part. Surface Mount is positioned in the way of this electronic part. Ensure that the power management IC's supply voltage does not exceed 26V volts. It can provide functions of type Battery Protection. For the electronic part to perform properly, it should be operated at temperature 0°C~125°C TJ. A battery chemistry of Lithium-Ion is used in this electronic part. There is a 3/24V volt power source. It is recommended that this battery protection IC be set to 5V at all times. The model is based on the BQ24314 family. Unless specified otherwise, Isup (the maximum supply current) must not exceed 0.6mA. System batterys can be powered by this voltage under 26V. 1.5A is the maximum current the power ICs can accept.

BQ24314DSGT Features

Available in 8-WFDFN Exposed Pad Package
with 8 Pins
Mounting Type: Surface Mount
Battery Chemistry : Lithium-Ion
operate supply voltage at the range of 5V
Output Voltage at the range of 4.35V

BQ24314DSGT Applications

There are a lot of Texas Instruments
BQ24314DSGT Battery Management ICs applications.

• Fork lifts
• Grid power infrastructure
• Cell phone towers
• A/C power substations
• Internet infrastructure equipment
• Aviation ground support systems
• Tower communications
• Weather stations
• Distributed energy resources
• Solar and wind-generating plants