BQ24704RGET Overview

There is a package for Tape & Reel (TR) in which it can be found.We've included it in the 24-VFQFN Exposed Pad package so that it's easier to use.Mounting type for the device is Surface Mount.It is recommended that the temperature be set to -40°C~125°C TJ in order to ensure reliable performance.In order to operate this device, an analog IC of POWER SUPPLY SUPPORT CIRCUIT must be used.The device requires Constant - Programmable current to charge.The related parts of the base part number BQ24704 can be found by following the order of the base part number.It contains a total of 24 terminations.As far as the battery pack is concerned, it is 18V Max.It is equipped with 24 pins.As long as it is charged at maximum current, it will be rated as 8A.It requires pins 24 to function.The number of available channels is 1.Devices require 24V as their maximum supply voltage.It should be able to run off a battery of 7V.In order for the device to operate properly, the supply voltage should not exceed 14V.When the output voltage is 18V, high efficiency is possible.In this case, the output current of the device is set to 1mA.A supply voltage of 7V is suitable for it, because it can operate with a low supply voltage.Amounting is in line with Surface Mount.Its supply carries 7μA current.With 300kHz switching frequency, the part operates.

BQ24704RGET Features

Battery pack voltage of 18V Max
1 channels
Switching frequency of 300kHz
24-VFQFN Exposed Pad package

BQ24704RGET Applications

There are a lot of Texas Instruments
BQ24704RGET Battery Chargers ICs applications.

• Golf carts
• Forklift
• Pallet jacks
• Personnel carriers
• Maintenance shops
• Rental fleets
• Truck dealers
• Floor scrubber
• Material handling
• Man lift