BQ24705RGET Overview

There is a package for Tape & Reel (TR) in which it can be found.We've included it in the 24-VFQFN Exposed Pad package so that it's easier to use.Mounting type for the device is Surface Mount.It is recommended that the temperature be set to -40°C~125°C TJ in order to ensure reliable performance.In order to operate this device, an analog IC of POWER SUPPLY MANAGEMENT CIRCUIT must be used.The device requires Constant - Programmable current to charge.The related parts of the base part number BQ24705 can be found by following the order of the base part number.It contains a total of 24 terminations.As far as the battery pack is concerned, it is 18V Max.It is equipped with 24 pins.It requires pins 24 to function.The number of available channels is 1.It should be able to run off a battery of 20V.In order for the device to operate properly, the supply voltage should not exceed 24V.When the output voltage is 18V, high efficiency is possible.In this case, the output current of the device is set to 8A.A supply voltage of 5V is suitable for it, because it can operate with a low supply voltage.Amounting is in line with Surface Mount.Its supply carries 8A current.With 600kHz switching frequency, the part operates.Input voltage is limited to 24V volts.As a maximum output supply voltage for this operation, the voltage must be set to 18V.

BQ24705RGET Features

Battery pack voltage of 18V Max
1 channels
Switching frequency of 600kHz
24-VFQFN Exposed Pad package

BQ24705RGET Applications

There are a lot of Texas Instruments
BQ24705RGET Battery Chargers ICs applications.

• Golf carts
• Forklift
• Pallet jacks
• Personnel carriers
• Maintenance shops
• Rental fleets
• Truck dealers
• Floor scrubber
• Material handling
• Man lift