BQ25040DQCT Overview

This item can be found in the Tape & Reel (TR) package.There is currently a package available named 10-WFDFN Exposed Pad.This device is mounted using type Surface Mount.Ideally, the temperature should be set to 0°C~125°C TJ in order to ensure reliable performance.The functionality of this device is provided by an analog IC called POWER SUPPLY SUPPORT CIRCUIT.To charge the device, you will need to supply it with Constant - Programmable of current.A list of related parts can be found by searching for the base part number BQ25040.Among its terminations, there are 10.In addition, it is equipped with 10 pins.The product is able to function with the help of 10 pins that are required.A total of 1 channels are available for use.Ideally, devices with 6.7V maximum supply voltages should be used.If it runs off of a 5V battery, then it should be able to run continuously.With a 26V supply voltage, it is capable of withstanding the operation of the device.In the case of 4.2V output voltage, there is a possibility of optimal efficiency.The operation is performed with an output current of 1.2A.This device is a member of subcategory Power Management Circuits.It can function at as low a supply voltage as possible, such as 4.35V.Vsup (maximum supply voltage) is set to 3mA.It has a 4.5V volt minimum input voltage.The supply voltage should be set to 6.5V for best efficiency.It can take a maximum input voltage of 26V volts.The maximum output supply voltage is reduced to 4.24V to fulfill the operation requirements.The maximum output current is reduced to 1.1A in order to meet the operation conditions.

BQ25040DQCT Features

1 channels
Power Management Circuits subcategory
10-WFDFN Exposed Pad package

BQ25040DQCT Applications

There are a lot of Texas Instruments
BQ25040DQCT Battery Chargers ICs applications.

• Conventional charge
• Opportunity charge
• Fast charge
• Fleet management
• Shop charger
• Golf carts
• Forklift
• Pallet jacks
• Personnel carriers
• Maintenance shops