BQ25070DQCR Overview

There is a package for Tape & Reel (TR) in which it can be found.We've included it in the 10-WFDFN Exposed Pad package so that it's easier to use.Mounting type for the device is Surface Mount.It is recommended that the temperature be set to -40°C~85°C TA in order to ensure reliable performance.In order to operate this device, an analog IC of POWER SUPPLY SUPPORT CIRCUIT must be used.The device requires Constant - Programmable current to charge.The related parts of the base part number BQ25070 can be found by following the order of the base part number.It contains a total of 10 terminations.As far as the battery pack is concerned, it is 3.5V.It is equipped with 10 pins.It requires pins 10 to function.The number of available channels is 1.Devices require 10.2V as their maximum supply voltage.It should be able to run off a battery of 4.5V.In order for the device to operate properly, the supply voltage should not exceed 28V.When the output voltage is 3.5V, high efficiency is possible.In this case, the output current of the device is set to 1A.A supply voltage of 3.75V is suitable for it, because it can operate with a low supply voltage.Its supply carries 3mA current.

BQ25070DQCR Features

Battery pack voltage of 3.5V
1 channels
10-WFDFN Exposed Pad package

BQ25070DQCR Applications

There are a lot of Texas Instruments
BQ25070DQCR Battery Chargers ICs applications.

• Golf carts
• Forklift
• Pallet jacks
• Personnel carriers
• Maintenance shops
• Rental fleets
• Truck dealers
• Floor scrubber
• Material handling
• Man lift