CD4013BM96G4 Overview

As a result, it is packaged as 14-SOIC (0.154, 3.90mm Width). There is an embedded version in the package Tape & Reel (TR). T flip flop is configured with an output of Differential. It is configured with a trigger that uses a value of Positive Edge. Surface Mountis occupied by this electronic component. Powered by a 3V~18Vvolt supply, it operates as follows. A temperature of -55°C~125°C TAis used in the operation. A flip flop of this type is classified as a D-Type. The 4000Bseries comprises this type of FPGA. Its output frequency should not exceed 24MHz Hz. It consumes 4μA of quiescent current without being affected by external factors. There have been 14 terminations. This D latch belongs to the family of CD4013. Power is supplied from a voltage of 5V volts. JK flip flop input capacitance is 5pF farads. In this case, the electronic component is mounted in the way of Surface Mount. With its 14pins, it is designed to work with most electronic flip flops. This device has the clock edge trigger type of Positive Edge. The part is included in FF/Latches. Normally, the supply voltage (Vsup) should be kept above 3V. A reliable performance of this D flip flop makes it well suited for use in TR. There are 1 output lines in this JK flip flop. This D latch consumes 20μA quiescent current at all. The number of channels is growing strong/weak: 2.

CD4013BM96G4 Features

Tape & Reel (TR) package
4000B series
14 pins

CD4013BM96G4 Applications

There are a lot of Texas Instruments CD4013BM96G4 Flip Flops applications.

• Control circuits
• EMI reduction circuitry
• Balanced Propagation Delays
• Latch
• Convert a momentary switch to a toggle switch
• Storage registers
• Parallel data storage
• Counters
• Cold spare funcion
• Single Down Count-Control Line