CD40193BNSR Overview

The device is packaged in the 16-SOIC (0.209, 5.30mm Width)type. This configuration uses 16terminations. By supplying 5Vwith a voltage of 5V , the device can be operated in a completely flexible manner. An interconnection of 1elements is provided by wires. All component pins are equal to 16. There is a package in the form of Tape & Reel (TR). As part of the circuit, there are 16pins that connect other components. The Surface Mountway is used to mount it. Due to the fact that it is a member of the 4000Bseries, it has a wide range of applications. Logic type Binary Counter is adopted. Ideally, the operating temperature should be set to -55°C~125°C. This device is mounted in the Surface Mountposition. As long as the supply voltage is set to [0], the device can operate with a greater degree of reliability. An array consists of 4bits for each element. Based on the Pbfree code, the result may be yes. It is important to note that TCO UP AND TCO DOWN OUTPUTS; SEPARATE UP/DOWN CLOCKare really important features of this electronic device. Further related parts may be found under the base part number CD40193. For its packaging, TRis employed. As low as 3V Vsup is the minimum supply voltage. The frequency of the system is 11MHz. The device consumes a quiescent current of 100μA volts.

CD40193BNSR Features

Embedded in the 16-SOIC (0.209, 5.30mm Width) package
4 bits per element
TCO UP AND TCO DOWN OUTPUTS; SEPARATE UP/DOWN CLOCK
Frequency of 11MHz

CD40193BNSR Applications

There are a lot of Texas Instruments
CD40193BNSR Counters & Dividers applications.

• Analog multiplexing and demultiplexing
• Digital multiplexing and demultiplexing
• Signal gating
• Frequency dividing circuits
• Time delay circuits
• Communications Digital Frequency Synthesizers;
• VHF, UHF, FM, AM, etc.
• Fixed or Programmable Frequency Division
• Time Out Timer for Consumer-Application Industrial Controls
• Timing applications