The electrical component comes in 16-DIP (0.300, 7.62mm) packaging, which makes it convenient to ship overseas. A high level of reliability can be achieved through the use of an advanced packaging method Tube. It is mounted in the position Through Hole. Multiplexers and demultiplexers have a number of circuits 8:1. Temperatures around -55°C~125°C TA are extended for operation. In total, there are 16 terminations. By its 8 channels, the electronic component provides high-quality output. If the voltage supply is 5V volts, the electrical component should be turned on and run. A total of 16 pins are injected into the electrical part body. A 1 circuit is present in this switch device. Using the CD4051 search parameter, you can discover variants of the switch. Internally, this switch multiplexer has a resistance of 240Ohm. Datasheets for functions of 16 pins are available. Theswitch device is a typical Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 20V to the switch device in normal circumstances. Analogue multiplexers of the Dual, Single supply type that are cost-effective. The lowest voltage fed to the electronic component should be 3V. This multiplexer would work with 80nA current. There is no problem with using dual supply voltage, but it should not exceed 9V. In the case of dual power supplies, you should connect at least 2.5V. It is integrated with a SINGLE-ENDED MULTIPLEXER analog IC. In this switch multiplexer, there are SEPARATE OUTPUT outputs available. It can operate from 18V operating voltages. The electrical component supports 8 inputs. There are various bandwidths available for data transfer.
CD4051BEE4 Features
8 Channels 80nA Supply Current Bandwidth: 20MHz
CD4051BEE4 Applications
There are a lot of Texas Instruments CD4051BEE4 Analog Switches & Multiplexers ICs applications.