The electronic component is convenient to ship overseas because it is packed in a 16-TSSOP (0.173, 4.40mm Width). This packaging method provides high reliability because it uses advanced packaging techniques. It is mounted in the position Surface Mount. Multiplexer and demultiplexer circuits have a number 8:1. Operating temperature extended to -55°C~125°C TA. In total, there are 16 terminations. The electronic part delivers high-quality output through its 8 channels. In the case of a voltage supply of 5V volts, the electrical part can be powered up and run. The electrical component body receives 16 pins. There are 1 circuits in this multiplexer. Using the CD4051 search parameter, you can discover variants of the switch. Internally, this switch multiplexer has a resistance of 240Ohm. To find out what the 16 pins do, please refer to the datasheets. This switch device is a typical Multiplexer or Switches. In normalcircumstances, users should not exceed 20V volts for the multiplexer. Analogue multiplexers of the Dual, Single supply type that are cost-effective. 3V is the lowest voltage that should be fed to the electronic electronic part. It would be sufficient to run this analogue multiplexer with 80nA current. For this multiplexer, dual supply voltage is feasible, but it should not exceed 9V. For dual power supplies, a voltage of at least 2.5V should be attached. There is an integrated analog IC SINGLE-ENDED MULTIPLEXER in the module. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them. A voltage of 18V can be used to operate the electronic component. In order to operate the 8 inputs, there are several steps to follow. A 20MHz-bandwidth can be used for data transfer.
CD4051BPWRG4 Features
8 Channels 80nA Supply Current Bandwidth: 20MHz
CD4051BPWRG4 Applications
There are a lot of Texas Instruments CD4051BPWRG4 Analog Switches & Multiplexers ICs applications.