CD4053BPW Overview

The electrical component comes in 16-TSSOP (0.173, 4.40mm Width) packaging, which makes it convenient to ship overseas. To ensure high reliability, a new packaging method Tube is used. In Surface Mount, you'll find this switch device. In the multiplexer and demultiplexer, 2:1 represents the number of circuits. Operating temperature around -55°C~125°C TA extended. In total, 16 terminations have occurred. A electrical component with 2 channels is capable of high-quality output. When the electronic component is given a voltage of 5V, it should be turned on and run. Into the electrical component body are injected 16 pins. On the other hand, analog switches can be constructed using SPDT switching circuits. Circuits number 3 make up this analogue multiplexer. Look for analog switch ic variants by searching with CD4053. A 240Ohm internal resistance characterizes this multiplexer. The datasheets for the 16 pins explain the functions. An abnormal situation would be for the switch device to be supplied with a voltage greater than 20V. A analog switch ic that has a cost-effective Dual, Single supply type. It is recommended to use 3V as the lowest voltage for the electrical part. The analogue multiplexer could operate on 80nA current. For this switch, a dual supply voltage is feasible, but it must not exceed 9VFor dual power supplies, a voltage of at least 2.5V should be attached. It is possible to use SEPARATE OUTPUT outputs on this digital multiplexer. This electrical part is compatible with 18V operating voltages. Among the inputs that can be operated are the 6 inputs. It is possible to transfer data over a 30MHz-bandwidth. There is 125Ohm Drain to Source resistance on this electronic part.

CD4053BPW Features

2 Channels
Switch Circuit: SPDT
80nA Supply Current
Bandwidth: 30MHz
Drain-to-Source resistance: 125Ohm

CD4053BPW Applications

There are a lot of Texas Instruments
CD4053BPW Analog Switches & Multiplexers ICs applications.

• Audio and video switching
• Automatic test equipment
• Precision data acquisition
• Battery-powered systems
• Sample-and-hold systems
• Communication systems
• Data Acquisition Systems
• Relay Replacement
• Battery Powered Systems
• Existing multiplexer applications (both fault-protected and nonfault-protected)