Shipping overseas is convenient due to the electrical component's packing in 16-TSSOP (0.173, 4.40mm Width). In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. Surface Mount is where this multiplexer is located. Multiplexer and demultiplexer circuits have a number 2:1. Operating temperature around -55°C~125°C TA extended. There are 16 terminations totally. As a result of its 2 channels, this electronic component provides high-quality output. An 5V voltage supply should allow the electrical part to be turned on and run. An electrical component like this is included in the 16 series. Unlike digital switches, these are based on SPDT switching circuits. There are 3 circuits in this switch device. Using the CD4053 search parameter, you can discover variants of the switch. The internal resistance of this digital multiplexer is 240Ohm. The functions of 16 pins can be found in the datasheets. Multiplexer or Switches is a typical switch device. In a normalsituation, users should not supply the switches with voltage higher than 20V. Analogue multiplexers of the Dual, Single supply type that are cost-effective. In order for the electronic part to function properly, the lowest voltage should be 3V. The analogue multiplexer could operate on 80nA current. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 9V. If you are using a dual power supply, you should attach at least 2.5V. This product is integrated with an analog integrated circuit (IC) of type SINGLE-ENDED MULTIPLEXER. The electrical part can be operated at 18V voltage levels. The electrical component supports 6 inputs. This switch operates within the bandwidth of 30MHz.
CD4053BPWRE4 Features
2 Channels Switch Circuit: SPDT 80nA Supply Current Bandwidth: 30MHz
CD4053BPWRE4 Applications
There are a lot of Texas Instruments CD4053BPWRE4 Analog Switches & Multiplexers ICs applications.
Voice over IP/DSL – Integrated Access Devices, Smart
Sample-and-hold systems
Medical
Communications systems
65 V DACs
Cable Telephony – NIU, Set-Top Box, Home Side Box
Intelligent PBX
Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads