Shipping overseas is convenient due to the electrical component's packing in 24-TSSOP (0.173, 4.40mm Width). High reliability is ensured by the advanced packaging method Tube. In Surface Mount, you'll find this switch device. The ratio between the number of multiplexer and demultiplexer circuits is 16:1. Operating temperature extended to -55°C~125°C TA. The total number of terminations is 24. Due to its 1 channels, the electrical component produces high-quality output. An 5V voltage supply should allow the electrical part to be turned on and run. As part of the design of the 24 series, this electronic part has been incorporated into the system. The multiplexer consists of 1 circuits. Try searching for the analog switch ic with CD4067 if you are looking for variants. Internally, this switch multiplexer has a resistance of 240Ohm. You can find the functions of the 24 pins in the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 18V. An effective Single supply digital multiplexer. The lowest voltage the electronic part should receive is 3V. This digital switch can be operated with a current of 80nA. A voltage of 3V~18V is required for this switch device, which drains from a single voltage source. SEPARATE OUTPUT outputs are utilized by this digital multiplexer. A 14MHz-bandwidth can be used for data transfer. The Drain to Source resistance of this electronic component is 125Ohm. Its conductivity is 16-bit.