CD4076BPWRE4 Overview

16-TSSOP (0.173, 4.40mm Width)is the packaging method. The package Tape & Reel (TR)contains it. T flip flop is configured with an output of Tri-State, Non-Inverted. It is configured with the trigger Positive Edge. Surface Mountmounts this electrical part. The JK flip flop operates with an input voltage of 3V~18V volts. It is operating at a temperature of -55°C~125°C TA. This D latch has the type D-Type. The FPGA belongs to the 4000B series. There should be no greater frequency than 16MHzon its output. The list contains 1 elements. It consumes 20μA of quiescent There are 16 terminations,The CD4076family includes it. It is powered from a supply voltage of 5V. The input capacitance of this T flip flop is 5pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. In this case, the electronic component is mounted in the way of Surface Mount. As you can see from the design, it has pins with 16. This device exhibits a clock edge trigger type of Positive Edge. This RS flip flops is a part number FF/Latches. 4bits are used in its design. For normal operation, the supply voltage (Vsup) should be kept above 3V. Considering its reliability, this T flip flop is well suited for TAPE AND REEL. To operate, the chip has a total of 4 output lines.

CD4076BPWRE4 Features

Tape & Reel (TR) package
4000B series
16 pins
4 Bits

CD4076BPWRE4 Applications

There are a lot of Texas Instruments CD4076BPWRE4 Flip Flops applications.

• Shift registers
• Counters
• Asynchronous counter
• Data Synchronizers
• Data transfer
• Computing
• Supports Live Insertion
• Dynamic threshold performance
• Single Up Count-Control Line
• ESD performance