CD74AC174M96E4 Overview
The flip flop is packaged in 16-SOIC (0.154, 3.90mm Width). A package named Tape & Reel (TR)includes it. Currently, the output is configured to use Non-Inverted. It is configured with the trigger Positive Edge. Surface Mountis positioned in the way of this electronic part. The JK flip flop operates at a voltage of 1.5V~5.5V. The operating temperature is -55°C~125°C TA. There is D-Type type of electronic flip flop associated with this device. FPGAs belonging to the 74ACseries contain this type of chip. Its output frequency should not exceed 95MHz Hz. The list contains 1 elements. It consumes 8μA of quiescent A total of 16terminations have been recorded. It is a member of the 74AC174 family. A voltage of 3.3V is used as the power supply for this D latch. The input capacitance of this T flip flop is 10pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. In this case, the D flip flop belongs to the ACfamily. A part of the electronic system is mounted in the way of Surface Mount. The 16pins are designed into the board. The clock edge trigger type for this device is Positive Edge. The part you are looking for is included in FF/Latches. It is designed with 6bits. There is a 5.5Vmaximum supply voltage (Vsup). The superior flexibility of this circuit is achieved by using 7 circuits. This D flip flop is well suited for TR based on its reliable performance. In order for the device to operate, it requires 3.3/5V power supplies. With an output current of 24mA, it is possible to design the device in any way you want. In order for the chip to function, it has 6output lines.
CD74AC174M96E4 Features
Tape & Reel (TR) package
74AC series
16 pins
6 Bits
3.3/5V power supplies
CD74AC174M96E4 Applications
There are a lot of Texas Instruments CD74AC174M96E4 Flip Flops applications.
- Patented noise
- Differential Individual
- Bus hold
- Memory
- Single Up Count-Control Line
- Divide a clock signal by 2 or 4
- Storage registers
- ESCC
- Load Control
- Guaranteed simultaneous switching noise level
