CD74ACT273M96 Overview

The flip flop is packaged in 20-SOIC (0.295, 7.50mm Width). As part of the package Cut Tape (CT), it is embedded. As configured, the output uses Non-Inverted. It is configured with the trigger Positive Edge. This electronic part is mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 4.5V~5.5V. It is operating at -55°C~125°C TA. This D latch has the type D-Type. In terms of FPGAs, it belongs to the 74ACT series. A frequency of 80MHzshould not be exceeded by its output. A total of 1elements are contained within it. There are 20 terminations,JK flip flop belongs to 74ACT273 family. The power source is powered by 5V. This T flip flop has a capacitance of 10pF farads at the input. Electronic devices of this type belong to the ACTfamily. There is an electronic component mounted in the way of Surface Mount. This board has 20 pins. The clock edge trigger type for this device is Positive Edge. This part is included in FF/Latches. An electronic part designed with 8bits is used in this application. To achieve this superior flexibility, 8 circuits are used. In light of its reliable performance, this T flip flop is well suited for TR. The system runs on a power supply of 5V watts. For high efficiency, the supply voltage should be kept at 5V. This T flip flop features a maximum design flexibility due to its output current of 50mA. There are 4 output lines in this JK flip flop. Despite external influences, it consumes 8μAof quiescent current.

CD74ACT273M96 Features

Cut Tape (CT) package
74ACT series
20 pins
8 Bits
5V power supplies

CD74ACT273M96 Applications

There are a lot of Texas Instruments CD74ACT273M96 Flip Flops applications.

• Functionally equivalent to the MC10/100EL29
• EMI reduction circuitry
• Balanced Propagation Delays
• Count Modes
• Parallel data storage
• Event Detectors
• Shift Registers
• Convert a momentary switch to a toggle switch
• Computing
• ESCC