CD74ACT373M Overview

20-SOIC (0.295, 7.50mm Width) contains it. The package is in the form of Tube. It uses Tri-State as its output configuration. This electrical device has Logic type D-Type Transparent Latch. Surface Mount is used to mount this electronic part. The supply voltage of the device is 4.5V~5.5V. It operates at -55°C~125°C degrees Celsius. 74ACT is the series number of this FPGA. Electronic parts with 8 bits are designed for this application. In this device, there are 20 terminations. There is no doubt that it belongs to the family 74ACT373. The supply voltage of the device is 5V. 20 pins are provided. ACT is the family of this electronic device. The 20 pins are designed into it. It is mounted according to the Surface Mount method. In this device, there are 2 ports. This part can be found within the FF/Latches subcategory. 5V power supplies are needed to operate it. Electronic circuits are represented by 8 input lines. Its 24mA output current allows for maximum design flexibility. If you want to achieve high efficiency, make sure the supply voltage is at 5V. The current consumed by the device is 8μA volts in quiescent mode, which cannot be affected by external factors. This element consists of 1. During operation, the maximum power current (ICC) that can be supplied for it to operate is set to 0.04mA.

CD74ACT373M Features

20-SOIC (0.295, 7.50mm Width) package
74ACT series
8 Bits
74ACT373 family
20 pin count
20 pins
5V power supplies
1 elements

CD74ACT373M Applications

There are a lot of Texas Instruments CD74ACT373M Latches applications.

• Flip-flops
• Meter applications
• Digital bus buffer
• Counting
• Ring counter
• Relay
• Clocks
• Registers
• Counter
• Network Switches