CD74ACT74M Overview

The flip flop is packaged in 14-SOIC (0.154, 3.90mm Width). D flip flop is included in the Tubepackage. It is configured with Differentialas an output. In the configuration of the trigger, Positive Edgeis used. There is an electric part mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 4.5V~5.5V. -55°C~125°C TAis the operating temperature. Logic flip flops of this type are classified as D-Type. In FPGA terms, D flip flop is a type of 74ACTseries FPGA. In order for it to function properly, its output frequency should not exceed 85MHz. In 14terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. This D latch belongs to the family of 74ACT74. The D flip flop is powered by a voltage of 5V . A 10pFfarad input capacitance is provided by this T flip flop. An electronic device belonging to the family ACTcan be found here. Electronic part Surface Mountis mounted in the way. This board is designed with 14pins on it. A Positive Edgeclock edge trigger is used in this device. The part is included in FF/Latches. Using 2 circuits, it is highly flexible. The power supply is 5V. A high level of efficiency can be achieved by maintaining the supply voltage at 5V. With an output current of 24mA, this device offers maximum design flexibility. To operate, the chip has a total of 1 output lines. There is a consumption of 4μAof quiescent current from it.

CD74ACT74M Features

Tube package
74ACT series
14 pins
5V power supplies

CD74ACT74M Applications

There are a lot of Texas Instruments CD74ACT74M Flip Flops applications.

• Power down protection
• Data Synchronizers
• Clock pulse
• Counters
• Set-reset capability
• Memory
• Event Detectors
• Functionally equivalent to the MC10/100EL29
• Test & Measurement
• Data transfer