CD74ACT74QM96G4Q1 Overview

As a result, it is packaged as 14-SOIC (0.154, 3.90mm Width). D flip flop is embedded in the Tape & Reel (TR) package. As configured, the output uses Differential. Positive Edgeis the trigger it is configured with. There is an electric part mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 4.5V~5.5V. A temperature of -40°C~125°C TAis used in the operation. This D latch has the type D-Type. In FPGA terms, D flip flop is a type of Automotive, AEC-Q100, 74ACTseries FPGA. A frequency of 85MHzshould be the maximum output frequency. It has been determined that there have been 14 terminations. The 74ACT74 family contains this object. An input voltage of 5Vpowers the D latch. A 10pFfarad input capacitance is provided by this T flip flop. A device of this type belongs to the family of ACT. Surface Mount mounts this electronic component. As you can see from the design, it has pins with 14. This device has Positive Edgeas its clock edge trigger type. It is part of the FF/Latchesbase part number family. The superior flexibility is achieved through the use of 2 circuits. Considering the reliability of this T flip flop, it is well suited for TR. In order for the device to operate, it requires 5V power supplies. If high efficiency is desired, the supply voltage should be kept at 5V. To operate, the chip has a total of 1 output lines. There is 4μA quiescent current consumption by it.

CD74ACT74QM96G4Q1 Features

Tape & Reel (TR) package
Automotive, AEC-Q100, 74ACT series
14 pins
5V power supplies

CD74ACT74QM96G4Q1 Applications

There are a lot of Texas Instruments CD74ACT74QM96G4Q1 Flip Flops applications.

• ESCC
• Power down protection
• Safety Clamp
• ESD protection
• Shift registers
• Cold spare funcion
• ATE
• Clock pulse
• Reduced system switching noise
• Consumer