CD74HC109M Overview

The item is packaged in 16-SOIC (0.154, 3.90mm Width)cases. There is an embedded version in the package Tube. This output is configured with Differential. Positive Edgeis the trigger it is configured with. This electronic part is mounted in the way of Surface Mount. The JK flip flop operates at 2V~6Vvolts. Temperature is set to -55°C~125°C TA. The type of this D latch is JK Type. In this case, it is a type of FPGA belonging to the 74HC series. You should not exceed 60MHzin the output frequency of the device. A total of 16terminations have been recorded. D latch belongs to the 74HC109 family. The power source is powered by 4.5V. Its input capacitance is 10pFfarads. A device of this type belongs to the family of HC/UH. There is an electronic part that is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 16. This device has Positive Edgeas its clock edge trigger type. This device has the base part number FF/Latches. In this case, the maximum supply voltage (Vsup) reaches 6V. The supply voltage (Vsup) should be kept above 2V for normal operation. Its output current of 5.2mAallows for maximum design flexibility. It consumes 4μA of quiescent current without being affected by external factors. There are 2 channels available.

CD74HC109M Features

Tube package
74HC series
16 pins

CD74HC109M Applications

There are a lot of Texas Instruments CD74HC109M Flip Flops applications.

• ESD performance
• Safety Clamp
• Divide a clock signal by 2 or 4
• Storage registers
• Convert a momentary switch to a toggle switch
• Load Control
• Shift Registers
• Power down protection
• Automotive
• Event Detectors