CD74HC173M Overview

It is packaged in the way of 16-SOIC (0.154, 3.90mm Width). As part of the package Tube, it is embedded. T flip flop uses Tri-State, Non-Invertedas the output. Positive Edgeis the trigger it is configured with. Surface Mountis positioned in the way of this electronic part. The JK flip flop operates at 2V~6Vvolts. -55°C~125°C TAis the operating temperature. There is D-Type type of electronic flip flop associated with this device. In terms of FPGAs, it belongs to the 74HC series. A frequency of 60MHzshould be the maximum output frequency. The list contains 1 elements. There is 8μA quiescent consumption. There have been 16 terminations. The 74HC173 family contains it. An input voltage of 4.5Vpowers the D latch. This T flip flop has a capacitance of 10pF farads at the input. A device of this type belongs to the family of HC/UH. In this case, the electronic component is mounted in the way of Surface Mount. This board has 16 pins. A Positive Edgeclock edge trigger is used in this device. The part is included in FF/Latches. It is designed with a number of bits of 4. It reaches 6Vwhen the supply voltage is maximal (Vsup). The supply voltage (Vsup) should be maintained above 2V for normal operation. This T flip flop features a maximum design flexibility due to its output current of 7.8mA. It is designed with 3 output lines. It has 2lines. In addition, you can refer to the additinal WITH DUAL OUTPUT ENABLE of the D latch. 4 channels are available.

CD74HC173M Features

Tube package
74HC series
16 pins
4 Bits

CD74HC173M Applications

There are a lot of Texas Instruments CD74HC173M Flip Flops applications.

• Balanced Propagation Delays
• Counters
• Buffer registers
• QML qualified product
• Balanced 24 mA output drivers
• Data storage
• Safety Clamp
• Cold spare funcion
• Frequency division
• Circuit Design