CD74HC173NSRE4 Overview
It is embeded in 16-SOIC (0.209, 5.30mm Width) case. There is an embedded version in the package Tape & Reel (TR). T flip flop is configured with an output of Tri-State, Non-Inverted. It is configured with a trigger that uses Positive Edge. Surface Mountmounts this electrical part. The supply voltage is set to 2V~6V. In this case, the operating temperature is -55°C~125°C TA. This logic flip flop is classified as type D-Type. The FPGA belongs to the 74HC series. A frequency of 60MHzshould be the maximum output frequency. A total of 1elements are contained within it. During its operation, it consumes 8μA quiescent energy. The number of terminations is 16. The 74HC173family includes it. Power is provided by a 4.5V supply. JK flip flop input capacitance is 10pF farads. It belongs to the family of electronic devices known as HC/UH. A part of the electronic system is mounted in the way of Surface Mount. The 16pins are designed into the board. In this device, the clock edge trigger type is Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. It is designed with a number of bits of 4. As soon as 6Vis reached, Vsup reaches its maximum value. The supply voltage (Vsup) should be kept above 2V for normal operation. Its flexibility is enhanced by 4 circuits. On the basis of its reliable performance, this D flip flop is well suited for use with TAPE AND REEL. The output current of 7.8mA makes it feature maximum design flexibility. It is designed with 3 output lines. As of now, there are 2input lines. In addition, you can refer to the additinal WITH DUAL OUTPUT ENABLE of the D latch.
CD74HC173NSRE4 Features
Tape & Reel (TR) package
74HC series
16 pins
4 Bits
CD74HC173NSRE4 Applications
There are a lot of Texas Instruments CD74HC173NSRE4 Flip Flops applications.
- ESD performance
- Instrumentation
- 2 – Bit synchronous counter
- Pattern generators
- Balanced 24 mA output drivers
- Parallel data storage
- Computers
- Functionally equivalent to the MC10/100EL29
- Common Clocks
- Test & Measurement
