CD74HC195NSRE4 Overview

The device is embedded in SOP package. It sums up to 16 where the chip's terminations add up. It is used to pack in Tape and Reel case. This part has an operating supply voltage of 4.5V. On this part, there are 1 elements. It is equipped with a pin count of 16. It is recommended to mount by Surface Mount. In the HC/UH series, the electronic component belongs. It is noted that the operating supply voltage of this chip falls within the range 5V. Taking note of the following additional details: COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT; J AND KBAR SERIAL INPUT. This device has 6 input lines available. This board has 16 pins in total. Under temperatures below 125°C, it is recommended to use it. For this device to work, it should not go below -55°C. Under 6V, this supply voltage is employed. Voltages higher than 2V are used for this supply.

CD74HC195NSRE4 Features

With 16 pins
Operate supply voltage at 5V

CD74HC195NSRE4 Applications

There are a lot of Texas Instruments CD74HC195NSRE4 Shift Registers applications.

• Counter
• Dual-rank shift, hold, and bus applications
• Output expansion
• Serial to parallel converter
• Serial-to-parallel data conversion
• LED matrix control
• 7-segment display control
• Sequence generator
• Remote control holding register
• Pattern Recognizers