CD74HC373M96 Overview

There is an embedded version of it in package 20-SOIC (0.295, 7.50mm Width). The package is in the form of Cut Tape (CT). It is configured with an output of Tri-State. There is a logic type of D-Type Transparent Latch associated with this electrical device. A Surface Mount mount is used for mounting this electronic part. The supply voltage of the device is 2V~6V. A temperature of -55°C~125°C is set as the operating temperature. The 74HC series is associated with this FPGA. An electronic part with 8 bits is designed. In this device, there are 20 terminations. There is no doubt that it belongs to the family 74HC373. The device works with a voltage of 4.5V for its supply voltage. There are 20 pins attached to it. HC/UH is the family name of this electronic device. In addition, it is designed with a pin number of 20. Surface Mount is the method used for mounting this electronic part. This device is equipped with 2 ports. Subcategory FF/Latches contains this part. It is possible to reach 6V when the maximum supply voltage (Vsup) has been reached. There are 2/6V power supplies required for this machine to operate. It is recommended to have a higher supply voltage (Vsup) than 2V. There are 8 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. On the basis of its reliability, this device is well suited for TR. The output current of 7.8mA makes it feature maximum design flexibility. There are 3 output lines that correspond to the binary equivalents of the input line. The current consumed by the device is 8μA volts in quiescent mode, which cannot be affected by external factors.

CD74HC373M96 Features

20-SOIC (0.295, 7.50mm Width) package
74HC series
8 Bits
74HC373 family
20 pin count
20 pins
2/6V power supplies

CD74HC373M96 Applications

There are a lot of Texas Instruments CD74HC373M96 Latches applications.

• Shift left register
• A/D and D/A conversion
• Parallel data storage
• Four-bit storage with output enable
• Frequency dividing
• Communication systems
• Programmable binary
• A/D converters
• Registers
• Parallel Input