CD74HC40103E Overview

The device is packaged in the 16-DIP (0.300, 7.62mm)type. This configuration uses 16terminations. By supplying 4.5Vwith a voltage of 4.5V , the device can be operated in a completely flexible manner. An interconnection of 1elements is provided by wires. All component pins are equal to 16. There is a package in the form of Tube. As part of the circuit, there are 16pins that connect other components. The Through Holeway is used to mount it. In this case, it belongs to the family of [0]. Due to the fact that it is a member of the 74HCseries, it has a wide range of applications. Logic type Binary Counter is adopted. Ideally, the operating temperature should be set to -55°C~125°C. This device is mounted in the Through Holeposition. As long as the supply voltage is set to [0], the device can operate with a greater degree of reliability. An array consists of 8bits for each element. It is important to note that TCO OUTPUT; RESET TO MAX COUNTare really important features of this electronic device. Further related parts may be found under the base part number 74HC40103. From the voltage source, there is a voltage of 2/6V volts. As low as 2V Vsup is the minimum supply voltage. The frequency of the system is 25MHz. It is possible to provide a voltage up to 6V (Vsup). The device consumes a quiescent current of 8μA volts.

CD74HC40103E Features

Embedded in the 16-DIP (0.300, 7.62mm) package
8 bits per element
TCO OUTPUT; RESET TO MAX COUNT
Frequency of 25MHz

CD74HC40103E Applications

There are a lot of Texas Instruments
CD74HC40103E Counters & Dividers applications.

• Analog multiplexing and demultiplexing
• Digital multiplexing and demultiplexing
• Signal gating
• Frequency dividing circuits
• Time delay circuits
• Communications Digital Frequency Synthesizers;
• VHF, UHF, FM, AM, etc.
• Fixed or Programmable Frequency Division
• Time Out Timer for Consumer-Application Industrial Controls
• Timing applications