CD74HC4024E Overview

A 14-DIP (0.300, 7.62mm)package is used for this device. Using 14terminations, it can be configured. 4.5Vis fully flexible due to its voltage supply. The device contains 1terminations. There are 14pins on all components. As a result, it is packaged in the way of a Tube. Circuit components are connected with 14pins. The device is mounted in the direction of [0]. It is included in the HC/UHfamily. With its 74HCseries designation, it can be used for a range of applications. It is decided to use the logic type [0]. It is recommended to set the operating temperature to -55°C~125°C. Using a Through Holemounting type, it is mounted. As a result, the device operates more reliably when a supply voltage of 2V~6Vis applied. It contains 7elements. It should be noted that there are more related parts under the 74HC4024base part number. In this case, 2/6Vvoltage is generated by the voltage source. Supply voltages can be as low as 2V volts (Vsup). Frequency 35MHzdetermines its operation. A maximum supply voltage (Vsup) is available up to 6V. During quiescent mode, it consumes 8μA current.

CD74HC4024E Features

Embedded in the 14-DIP (0.300, 7.62mm) package
7 bits per element
Frequency of 35MHz

CD74HC4024E Applications

There are a lot of Texas Instruments
CD74HC4024E Counters & Dividers applications.

• Communications Digital Frequency Synthesizers;
• VHF, UHF, FM, AM, etc.
• Fixed or Programmable Frequency Division
• Time Out Timer for Consumer-Application Industrial Controls
• Timing applications
• Clocks
• Up Counters
• Dual Up Counters
• MULTIPLICATION
• DIVISION