CD74HC4046APW Overview

The Tube method is used for packaging clock ICs. This clock generator is embedded in the 16-TSSOP (0.173, 4.40mm Width) package. The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible. In it, there are 16 terminations to be found. For this clock generator ic, a voltage of 3V is required. This Clock PLL will be fed by CMOS as its input. 38MHz is the maximal value for normal operation. PLL clock is mounted in the way of Surface Mount. Approximately 6V is the maximum supply voltage needed by this time clock generator. A maximum voltage of 2V should be used for this frequency generator for safety reasons. Clock PLL works with 2V~6V supply voltage provided. Test statistics estimate a temperature of -55°C~125°C, which should be set as the ambient temperature. This electronic component is usually classified as a Phase Lock Loop (PLL) component. An IC that generates clocks specifically for microprocessors, this clock PLL is 16-bits in si16e. 74HC4046 is the base part number for finding related electronic parts. A 16 pin is available on the clock PLL. The maximum supply voltage that clock generator can handle is 5V. As such, it is often referred to as a kind of PLL or Frequency Synthesis Circuits clock PLL. 74HC series electronic parts are included in this product. In this case, we are looking at a frequency generator with 1 elements that is low-jitter. There should be a maximum supply current of 204mA for this time clock generator.

CD74HC4046APW Features

Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3V
Operating supply voltage of 5V

CD74HC4046APW Applications

There are a lot of Texas Instruments CD74HC4046APW Clock Generators applications.

• Frequency synthesis
• Wi-Fi routers
• Tracking filters
• Reference signals to RF systems
• PMR (Professional Mobile Radio)
• Frequency synthesis
• GPS systems
• Test and instrumentation equipment
• Motor speed controls
• FPGA and processor clocks