CD74HC4051M96 Overview

Presented in 16-SOIC (0.154, 3.90mm Width), this electrical component is convenient for overseas shipping. High reliability is ensured by the advanced packaging method Cut Tape (CT). A switch device like this is mounted in Surface Mount. Multiplexer and demultiplexer circuits have a number 8:1. Operating temperature around -55°C~125°C TA extended. Total terminations are 16. A high-quality output is provided by the electrical component's 1 channels. An 4.5V voltage supply should allow the electrical part to be turned on and run. This electrical component is included in the 16 series of products. It consists of 1 circuits. Look for analog switch ic variants by searching with 74HC4051. In this multiplexer, the internal resistance is 130Ohm. For details about the functions of 16 pins, please refer to the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. A voltage higher than 6V should not normally be supplied to the switches. Analogue multiplexers of the Dual, Single supply type that are cost-effective. In order for the electronic part to function properly, the lowest voltage should be 2V. For this switch, a dual supply voltage is feasible, but it must not exceed 5VWhen using dual power supplies, you should attach at least 1V. Integrated with an analog IC SINGLE-ENDED MULTIPLEXER. In order to operate the 8 inputs, there are several steps to follow. A 180MHz-bandwidth can be used for data transfer. It has a Drain to Source resistance of 130Ohm ohms.

CD74HC4051M96 Features

1 Channels
Bandwidth: 180MHz
Drain-to-Source resistance: 130Ohm

CD74HC4051M96 Applications

There are a lot of Texas Instruments CD74HC4051M96 Analog Switches & Multiplexers ICs applications.

• PDAs
• SDH/SONET multiplexers
• Cable Telephony – NIU, Set-Top Box, Home Side Box
• Relay Replacement
• Medical
• Communications systems
• Data Acquisition Systems
• Industrial and process control systems
• Low-Voltage
• SDH