CD74HC4051MM96EP Overview

The electronic component is convenient to ship overseas because it is packed in a 16-SOIC (0.154, 3.90mm Width). In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. It is mounted in the position Surface Mount. 8:1 is the ratio of multiplexer to demultiplexer circuits. Operating temperature around -55°C~125°C TA extended. There are 16 terminations totally. A electrical component with 8 channels is capable of high-quality output. When a voltage supply of 4.5V is used, the electronic component should be turned on and run. A total of 16 pins are injected into the electrical part body. A total of 1 circuits make up this switch device. Using the 74HC4051 search parameter, you can discover variants of the switch. As far as internal resistance is concerned, it has 130Ohm. Datasheets for 16 pin functions are available upon request. There is a standard Multiplexer or Switches analogue multiplexer here. An abnormal situation would be for the switch device to be supplied with a voltage greater than 6V. Analogue multiplexers of the Dual, Single supply type that are cost-effective. The lowest voltage fed to the electronic component should be 2V. If put voltage greater than 16μA on the device, damage may be caused to the analogue multiplexer. If put voltage greater than 5V on the multiplexer, damage may be caused to the device. You should attach at least 1V voltage if you are using dual power supply. This product is integrated with an analog integrated circuit (IC) of type SINGLE-ENDED MULTIPLEXER. In 180MHz-bandwidths, data can be transferred.

CD74HC4051MM96EP Features

8 Channels
Bandwidth: 180MHz

CD74HC4051MM96EP Applications

There are a lot of Texas Instruments CD74HC4051MM96EP Analog Switches & Multiplexers ICs applications.

• High reliability control systems
• Microprocessor Controlled Analog Systems
• Relay Replacement
• Cell phones
• Isolation
• PDH Multiplexers
• Multi-Line E1 Interface Cards
• Ultrasound
• Communication systems
• Cellular phones