CD74HC4051NSRE4 Overview

The electronic part can be shipped overseas conveniently because it is packaged in 16-SOIC (0.209, 5.30mm Width). In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. There is an analog multiplexer mounted in position Surface Mount. There is 8:1 ratio between the number of multiplexers and demultiplexers. Around -55°C~125°C TA is the extended operating temperature. In total, there are 16 terminations. This electronic part offers high-quality output due to its 1 channels. In the case of a voltage supply of 4.5V volts, the electrical part can be powered up and run. There are 16 pins injected into the electronic part body. A total of 1 circuits make up this switch device. Search with 74HC4051 if you are looking for analog multiplexer variants. It has an internal resistance of 130Ohm. The functions of 16 pins can be found in the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. In normalcircumstances, users should not exceed 6V volts for the multiplexer. Dual, Single supply type digital switch with a low cost. 2V is the lowest voltage that should be fed to the electronic electronic part. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 5V. In the case of dual power supplies, you should connect at least 1V. There is an integrated analog IC SINGLE-ENDED MULTIPLEXER in the module. There are 8 inputs to be operated. The transfer of data can be performed over 180MHz bandwidths.

CD74HC4051NSRE4 Features

1 Channels
Bandwidth: 180MHz

CD74HC4051NSRE4 Applications

There are a lot of Texas Instruments
CD74HC4051NSRE4 Analog Switches & Multiplexers ICs applications.

• Isolation
• Medical
• Imaging
• Ultrasound
• Audio and video switching
• Automatic test equipment
• Precision data acquisition
• Battery-powered systems
• Sample-and-hold systems
• Communication systems