CD74HC4051PWR Overview

Presented in 16-TSSOP (0.173, 4.40mm Width), this electrical component is convenient for overseas shipping. This high-reliability packaging method uses advanced packaging methods Cut Tape (CT). Multiplexers like this are mounted in the Surface Mount position. Multiplexers and demultiplexers have a ratio of 8:1. Operation at a temperature around -55°C~125°C TA. The total number of terminations is 16. The electronic part provides high-quality output because it has 1 channels. If the voltage supply is 4.5V volts, the electrical component should be turned on and run. A key feature of the 16 series is the inclusion of this electronic part as part of its design. Circuits number 1 make up this analogue multiplexer. 74HC4051 can be used to search for analog multiplexer variants. An switch multiplexer with 130Ohm internal resistance has a value of 130Ohm. Datasheets for 16 pin functions are available upon request. This switch device is a typical Multiplexer or Switches. Users shouldn't supply more than 6V voltage to the switch device. Digital switch that provides Dual, Single power at a cost-effective price. The lowest voltage the electronic part should receive is 2V. There is no problem with using dual supply voltage, but it should not exceed 5V. With dual power supplies, you should attach at least 1V. Integrated with an analog IC SINGLE-ENDED MULTIPLEXER. A 8 input needs to be operated. There are various bandwidths available for data transfer. There is 40Ohm resistance between the Drain and Source on this part.

CD74HC4051PWR Features

1 Channels
Bandwidth: 180MHz
Drain-to-Source resistance: 40Ohm

CD74HC4051PWR Applications

There are a lot of Texas Instruments CD74HC4051PWR Analog Switches & Multiplexers ICs applications.

• ISDN NT1/TA
• Cable Telephony – NIU, Set-Top Box, Home Side Box
• Audio and video switching
• Audio and video signal routing
• Industrial control systems
• Power routing
• Remote wireless modules
• Cell phones
• Microprocessor Controlled Analog Systems
• Fiber to the Home