CD74HC4053M96E4 Overview

The electrical component comes in SOIC packaging, which makes it convenient to ship overseas. To ensure high reliability, a new packaging method Tape and Reel is used. In total, 16 terminations have occurred. A electrical component with 2 channels is capable of high-quality output. When the electronic component is given a voltage of 4.5V, it should be turned on and run. Into the electrical component body are injected 16 pins. A 130Ohm internal resistance characterizes this multiplexer. The datasheets for the 16 pins explain the functions. The analog multiplexer shown here is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 6V. A analog switch ic that has a cost-effective Dual, Single supply type. It is recommended to use 2V as the lowest voltage for the electrical part. For this switch, a dual supply voltage is feasible, but it must not exceed 5VFor dual power supplies, a voltage of at least 1V should be attached. Integrated with an analog IC SINGLE-ENDED MULTIPLEXER. Among the inputs that can be operated are the 6 inputs. It is possible to transfer data over a 200MHz-bandwidth. A temperature above 125°C is not suitable for operation of the analogue multiplexer. This digital multiplexer has 3 outputs.

CD74HC4053M96E4 Features

2 Channels
Bandwidth: 200MHz

CD74HC4053M96E4 Applications

There are a lot of Texas Instruments
CD74HC4053M96E4 Analog Switches & Multiplexers ICs applications.

• Audio and video switching
• Automatic test equipment
• Precision data acquisition
• Battery-powered systems
• Sample-and-hold systems
• Communication systems
• Data Acquisition Systems
• Relay Replacement
• Battery Powered Systems
• Existing multiplexer applications (both fault-protected and nonfault-protected)