CD74HC4094EE4 Overview

PDIP is a package containing the embedded device. Taking the total number of terminations on the chip and adding them up, we get 16. A Rail/Tube case is used to pack it. The part operates at 4.5V voltage. A total of 1 elements can be found on this part. It is equipped with a pin count of 16. It is recommended that the mount should be done by Through Hole. There is an electronic component in the HC/UH. It is noted that this chip uses an operating supply voltage of 5V. The following additional aspects of this section are worth noting: PARALLEL OUTPUT IS LATCHED; SERIAL OUTPUT LATCHED WITH SHIFT CLOCK ALSO AVAILABLE. A total of 8 bits are present on the IC chip. It has a total of zero pins. At temperatures below 125°C, it is recommended for use. Ideally, it should not fall below -55°C. A voltage of 6V is employed as the supply voltage. There is a voltage applied to the supply that is greater than 2V. A total of 10 output lines are available for operation. It belongs to the subcategory of Shift Registers.

CD74HC4094EE4 Features

With 16 pins
Operate supply voltage at 5V
With 10 output lines

CD74HC4094EE4 Applications

There are a lot of Texas Instruments
CD74HC4094EE4 Shift Registers applications.

• Data Processors
• Pseudo Random Pattern Generator
• Pulse Extenders
• Pattern Recognizers
• Interconnectors
• Counter
• Data manipulation
• Delay Line
• Generate time delay toward digital circuits
• Parallel data